3onedata E1 to Optic Fiber Modem Converter

$195.00

Model: ERA-MODEL7301
Manufactured by: 3onedata

Products Content:

MODEL7301 Optical Optic Modem converts E1 electrical signal into optical data stream for transport over single mode or multimode fiber optic cables. At the opposite end of the fiber, the optical stream is converted back into electrical signals of the appropriate interface such as G.703 & V.35. This fiber optic modem extends the transmission distance up to more than 100Km. The frame format of MOD-E1 is frame/unframe for E1, so it can be used to transmit E1 signal of frame video or unframe video. The modem is capable of transmitting synchronous data with external clock at speeds from 1 Kbps up to 2.048 Mbps (n*64K), the modem can also be set to transmit asynchronous data at speeds from DC up to 64 Kbps.

Features

1.Lucency transfer E1(G.703) protocol
2.Support optic fiber loop and E1 port loop
3.Choice ST, FC, SC connector
4.E1(G.703)interface support 120ohm(RJ-45) and 75ohm(BNC)
5.Multi-mode 2KM, signal-mode 20-100KM

Communication

Interface standard	Accord ITU-T G.703 protocol
E1 signal (BNC)	IN, OUT
E1 signal(RJ-45)	T+, T-, R+, R-, GND
Optic fiber signal	TX, RX
Working	Asynchronism, transparent transfer
E1port rate	2.048Mbps
Optic port rate	8.192Mbps
E1 port coding	HDB3
Optic port coding	CMI
Optic fiber wavelength	Multi-mode 850nm, signal-mode 1310nm
Optic port trasmission	Multi-mode 2KM, signal-mode 20-100KM
Interface protection	1500V electromagnetism isolate
E1 port connectorr	120ohm(RJ-45) and 75ohm(Balance)
Optic port connector	Multi-mode adopt ST connector, signal-mode adopt FC/SC connector

Environment

Working temperature     -25 to 70℃
Storage temperature     -40 to 85℃
Humidity     Relative humidity 5% to 95%

Power

Input power   220VAC or -48VDC
Consumption   2W

Dimension

L*W*H     227mm*147mm*42mm
Shell     Plastic
Color     Black
Weight     260g